| 102841 |
Solinst 615N Stainless Steel Piezometer 6" |
 |
|
Price:
Call
|
|
| The Model 615 Drive-Point Piezometers are designed to give field personnel a truly inexpensive method to monitor groundwater in suitable conditions. Solinst 615 Drive-Point Piezometers attach to inexpensive 3/4" NPT steel drive pipe which is widely available through local plumbing and hardware stores. Solinst Drive-Point Piezometers are most often installed permanently as wells, for short-term or long-term monitoring of groundwater level and quality. They can also be used once and removed. Drive-point, tubing and pipe alternatives are available to suit almost every situation. High quality samples can be obtained as polyethylene or Teflon® lined tubing is attached to the stainless steel drive point piezometers. A shielded version is available which avoids clogging or smearing of the screen during installation. Sampling and head measurements are taken within the tubing with small diameter equipment. Solinst Drive-Point Piezometers can be driven into the ground, or the soil at the bottom of a borehole with any direct push or drilling technology, including a vibrating power hammer or the manual slide hammer shown at right. Please call 1-614-846-1900.
|
|  |
| 102842 |
Solinst 615N Stainless Steel Piezometer 1' |
| |
|
Price:
Call
|
|
| The Model 615 Drive-Point Piezometers are designed to give field personnel a truly inexpensive method to monitor groundwater in suitable conditions. Solinst 615 Drive-Point Piezometers attach to inexpensive 3/4" NPT steel drive pipe which is widely available through local plumbing and hardware stores. Solinst Drive-Point Piezometers are most often installed permanently as wells, for short-term or long-term monitoring of groundwater level and quality. They can also be used once and removed. Drive-point, tubing and pipe alternatives are available to suit almost every situation. High quality samples can be obtained as polyethylene or Teflon® lined tubing is attached to the stainless steel drive point piezometers. A shielded version is available which avoids clogging or smearing of the screen during installation. Sampling and head measurements are taken within the tubing with small diameter equipment. Solinst Drive-Point Piezometers can be driven into the ground, or the soil at the bottom of a borehole with any direct push or drilling technology, including a vibrating power hammer or the manual slide hammer shown at right. Please call 1-614-846-1900.
|
|  |
| 102433 |
Solinst 601 Standpipe Piezometer 6" |
| |
|
Price:
Call
|
|
| The Solinst Standpipe Piezometer, Model 601 is the least expensive of the drive-point line, and is designed to be placed within an open hole. The pointed PVC tip is suitable for pushing into very loose sands at the base of a borehole, or for backfilling in place within test pits. The piezometer uses a porous plastic filter set inside a perforated PVC body, which connects to the surface with 3/4" ID PVC riser pipe connected with slip couplings. The piezometer tips come in a variety of lengths. Please call 1-614-846-1900 for details.
|
|  |
| 101928 |
Solinst 660 Profiler AW Version |
| |
|
Price:
Call
|
|
| The Solinst 660 Profiler is designed to allow collection of samples from multiple points in a single drive/drilling location, at discrete zones. It allows: Contaminant vs. Depth Profiling and Detailed Plume Delineation. The Model 660 Drive-Point Profiler is a modified version of the profiling device developed at the University of Waterloo and described in a paper presented at the 1994 NGWA Outdoor Action Conference. The Model 660 can be installed with a rig that pushes, hammers or vibrates the Profiler into suitable sands. It uses AW rod, and can be adapted to attach to the custom rod used by some rigs. The Profiler has a 1.75" (45 mm) dia. AW stainless steel tip with one row of screened inlet holes set circumferentially. The inlet holes lead to a single stainless steel, LDPE or Teflon® sample line which attaches to a pump, typically a Peristaltic Pump. Please call 1-614-846-1900 for details.
|
|  |
| 100396 |
Solinst 601 Standpipe Piezometer 1' |
| |
|
Price:
Call
|
|
| The Solinst Standpipe Piezometer, Model 601 is the least expensive of the drive-point line, and is designed to be placed within an open hole. The pointed PVC tip is suitable for pushing into very loose sands at the base of a borehole, or for backfilling in place within test pits. The piezometer uses a porous plastic filter set inside a perforated PVC body, which connects to the surface with 3/4" ID PVC riser pipe connected with slip couplings. The piezometer tips come in a variety of lengths. Please call 1-614-846-1900 for details.
|
|  |
| 104366 |
Solinst 615S Shielded Stainless Steel Piezometer 6" |
| |
|
Price:
Call
|
|
| The Model 615 Drive-Point Piezometers are designed to give field personnel a truly inexpensive method to monitor groundwater in suitable conditions. Solinst 615 Drive-Point Piezometers attach to inexpensive 3/4" NPT steel drive pipe which is widely available through local plumbing and hardware stores. Solinst Drive-Point Piezometers are most often installed permanently as wells, for short-term or long-term monitoring of groundwater level and quality. They can also be used once and removed. Drive-point, tubing and pipe alternatives are available to suit almost every situation. High quality samples can be obtained as polyethylene or Teflon® lined tubing is attached to the stainless steel drive point piezometers. A shielded version is available which avoids clogging or smearing of the screen during installation. Sampling and head measurements are taken within the tubing with small diameter equipment. Solinst Drive-Point Piezometers can be driven into the ground, or the soil at the bottom of a borehole with any direct push or drilling technology, including a vibrating power hammer or the manual slide hammer shown at right. Please call 1-614-846-1900.
|
|  |
| 100929 |
Solinst 615 Stainless Steel Piezometer 6 |
| |
|
Price:
Call
|
|
| The Model 615 Drive-Point Piezometers are designed to give field personnel a truly inexpensive method to monitor groundwater in suitable conditions. Solinst 615 Drive-Point Piezometers attach to inexpensive 3/4" NPT steel drive pipe which is widely available through local plumbing and hardware stores. Solinst Drive-Point Piezometers are most often installed permanently as wells, for short-term or long-term monitoring of groundwater level and quality. They can also be used once and removed. Drive-point, tubing and pipe alternatives are available to suit almost every situation. High quality samples can be obtained as polyethylene or Teflon® lined tubing is attached to the stainless steel drive point piezometers. A shielded version is available which avoids clogging or smearing of the screen during installation. Sampling and head measurements are taken within the tubing with small diameter equipment. Solinst Drive-Point Piezometers can be driven into the ground, or the soil at the bottom of a borehole with any direct push or drilling technology, including a vibrating power hammer or the manual slide hammer shown at right. Please call 1-614-846-1900.
|
|  |
| 102081 |
Solinst 615 Stainless Steel Piezometer 1' |
| |
|
Price:
Call
|
|
| The Model 615 Drive-Point Piezometers are designed to give field personnel a truly inexpensive method to monitor groundwater in suitable conditions. Solinst 615 Drive-Point Piezometers attach to inexpensive 3/4" NPT steel drive pipe which is widely available through local plumbing and hardware stores. Solinst Drive-Point Piezometers are most often installed permanently as wells, for short-term or long-term monitoring of groundwater level and quality. They can also be used once and removed. Drive-point, tubing and pipe alternatives are available to suit almost every situation. High quality samples can be obtained as polyethylene or Teflon® lined tubing is attached to the stainless steel drive point piezometers. A shielded version is available which avoids clogging or smearing of the screen during installation. Sampling and head measurements are taken within the tubing with small diameter equipment. Solinst Drive-Point Piezometers can be driven into the ground, or the soil at the bottom of a borehole with any direct push or drilling technology, including a vibrating power hammer or the manual slide hammer shown at right. Please call 1-614-846-1900.
|
|  |
| 101225 |
Solinst 660 Profiler AW SS Grout Tip Version |
| |
|
Price:
Call
|
|
| The Solinst 660 Profiler is designed to allow collection of samples from multiple points in a single drive/drilling location, at discrete zones. It allows: Contaminant vs. Depth Profiling and Detailed Plume Delineation. The Model 660 Drive-Point Profiler is a modified version of the profiling device developed at the University of Waterloo and described in a paper presented at the 1994 NGWA Outdoor Action Conference. The Model 660 can be installed with a rig that pushes, hammers or vibrates the Profiler into suitable sands. It uses AW rod, and can be adapted to attach to the custom rod used by some rigs. The Profiler has a 1.75" (45 mm) dia. AW stainless steel tip with one row of screened inlet holes set circumferentially. The inlet holes lead to a single stainless steel, LDPE or Teflon� sample line which attaches to a pump, typically a Peristaltic Pump. Please call 1-614-846-1900 for details.
|
|  |
| 104637 |
Solinst 615SN Shielded Stainless Steel Piezometer 6" |
| |
|
Price:
Call
|
|
| The Model 615 Drive-Point Piezometers are designed to give field personnel a truly inexpensive method to monitor groundwater in suitable conditions. Solinst 615 Drive-Point Piezometers attach to inexpensive 3/4" NPT steel drive pipe which is widely available through local plumbing and hardware stores. Solinst Drive-Point Piezometers are most often installed permanently as wells, for short-term or long-term monitoring of groundwater level and quality. They can also be used once and removed. Drive-point, tubing and pipe alternatives are available to suit almost every situation. High quality samples can be obtained as polyethylene or Teflon® lined tubing is attached to the stainless steel drive point piezometers. A shielded version is available which avoids clogging or smearing of the screen during installation. Sampling and head measurements are taken within the tubing with small diameter equipment. Solinst Drive-Point Piezometers can be driven into the ground, or the soil at the bottom of a borehole with any direct push or drilling technology, including a vibrating power hammer or the manual slide hammer shown at right. Please call 1-614-846-1900.
|
|  |
| 102312 |
Solinst 615S Shielded Stainless Steel Piezometer 1' |
| |
|
Price:
Call
|
|
| The Model 615 Drive-Point Piezometers are designed to give field personnel a truly inexpensive method to monitor groundwater in suitable conditions. Solinst 615 Drive-Point Piezometers attach to inexpensive 3/4" NPT steel drive pipe which is widely available through local plumbing and hardware stores. Solinst Drive-Point Piezometers are most often installed permanently as wells, for short-term or long-term monitoring of groundwater level and quality. They can also be used once and removed. Drive-point, tubing and pipe alternatives are available to suit almost every situation. High quality samples can be obtained as polyethylene or Teflon® lined tubing is attached to the stainless steel drive point piezometers. A shielded version is available which avoids clogging or smearing of the screen during installation. Sampling and head measurements are taken within the tubing with small diameter equipment. Solinst Drive-Point Piezometers can be driven into the ground, or the soil at the bottom of a borehole with any direct push or drilling technology, including a vibrating power hammer or the manual slide hammer shown at right. Please call 1-614-846-1900.
|
|  |
| 102319 |
Solinst 615SN Shielded Stainless Steel Piezometer 1' |
| |
|
Price:
Call
|
|
| The Model 615 Drive-Point Piezometers are designed to give field personnel a truly inexpensive method to monitor groundwater in suitable conditions. Solinst 615 Drive-Point Piezometers attach to inexpensive 3/4" NPT steel drive pipe which is widely available through local plumbing and hardware stores. Solinst Drive-Point Piezometers are most often installed permanently as wells, for short-term or long-term monitoring of groundwater level and quality. They can also be used once and removed. Drive-point, tubing and pipe alternatives are available to suit almost every situation. High quality samples can be obtained as polyethylene or Teflon® lined tubing is attached to the stainless steel drive point piezometers. A shielded version is available which avoids clogging or smearing of the screen during installation. Sampling and head measurements are taken within the tubing with small diameter equipment. Solinst Drive-Point Piezometers can be driven into the ground, or the soil at the bottom of a borehole with any direct push or drilling technology, including a vibrating power hammer or the manual slide hammer shown at right. Please call 1-614-846-1900.
|
|  |
| 101557 |
Solinst 601 Standpipe Piezometer 2' |
| |
|
Price:
Call
|
|
| The Solinst Standpipe Piezometer, Model 601 is the least expensive of the drive-point line, and is designed to be placed within an open hole. The pointed PVC tip is suitable for pushing into very loose sands at the base of a borehole, or for backfilling in place within test pits. The piezometer uses a porous plastic filter set inside a perforated PVC body, which connects to the surface with 3/4" ID PVC riser pipe connected with slip couplings. The piezometer tips come in a variety of lengths. Please call 1-614-846-1900 for details.
|
|  |
| 100938 |
Solinst 601 Standpipe Piezometer 3' |
| |
|
Price:
Call
|
|
| The Solinst Standpipe Piezometer, Model 601 is the least expensive of the drive-point line, and is designed to be placed within an open hole. The pointed PVC tip is suitable for pushing into very loose sands at the base of a borehole, or for backfilling in place within test pits. The piezometer uses a porous plastic filter set inside a perforated PVC body, which connects to the surface with 3/4" ID PVC riser pipe connected with slip couplings. The piezometer tips come in a variety of lengths. Please call 1-614-846-1900 for details.
|
|  |
