| 0037 |
A-144 column |
|
|
Reconditioned Price:
$495.00
|
|
| The A-144 column allows a Foxboro OVA-128 GC user to
separate and measure methane, ethane, and propane via
gas chromatography. This method is helpful in
determining methane versus non-methane compounds.
Pressure sensitive chart paper is $24.99 per roll.
Intrinsically Safe.
The A-144 column allows a Foxboro OVA-128 GC user to
separate and measure methane, ethane, and propane via
gas chromatography. This method is helpful in
determining methane versus non-methane compounds. Please call 1-614-846-1900 for details.
Rental Rates
| Daily | Weekly | Monthly |
| $35.00 | $75.00 | $195.00 |
|
|  |
| 010-0011-000 |
Alkaline Battery |
 |
|
Price:
Call
|
|
| Please call 1-614-846-1900 for more details.
|
| |
|
| |
| M1BBP |
Battery Pack for Miran 1B and 1B2 |
|
|
Reconditioned Price:
Call
|
|
| Reconditioned battery pack for the Miran 1B and 1B2 analyzer. Please call 1-614-846-1900 for details.
|
| |
| |
BW Technologies GasProbeCO |
| |
|
Price:
Call
|
|
| Accurate, compact and lightweight, the Gas Probe CO provides fast, accurate sampling of CO concentrations from 0 to 1,000 parts per million. The GasProbe CO is ideal for technicians, fire department personnel and other professionals who need to measure CO levels in potentially hazardous environments.
|
|  |
|
| |
|
| |
|
| |
|
| |
|
| |
| 0165 |
Closed Loop Calibrator For Miran analyzers |
| |
|
Price:
$1,250.00
|
|
| The Closed Loop Calibrator Allows for direct
injection of gas or liquid standards for calibration
of the Miran infrared series of gas analyzers. The
system is teflon lined and has a replaceable septum. Please call 1-614-846-1900 for details.
Rental Rates
| Daily | Weekly | Monthly |
| $40.00 | $95.00 | $250.00 |
|
|  |
| 0181 |
Cyclone |
|
|
Reconditioned Price:
Call
|
|
| Cyclones separate respirable dust particles from non-
respirable dust particles. Allows specifically for
respirable dust sampling. Complete with tubing.
Requires sampling cassette for sample collection. Please call 1-614-846-1900 for details.
Rental Rates
| Daily | Weekly | Monthly |
| $15.00 | $20.00 | $30.00 |
|
|  |
|
|  |
|
|  |
|
|  |
|
|  |
|
|  |
|
|  |
|
|  |
|
|  |
|
|  |
|
|  |
|
|  |
|
|  |
| PTD-132A |
Foxboro Programmed Thermal Disorber |
|
|
Reconditioned Price:
Call
|
|
| Automatically performs thermal disorption of packed sorbent collector tubes and storage of the resulting 300 mL sample for later analysis by gas chromatography or other sutible analytical technique. The PTD makes possible quick and easy determination of time-weighted averages (TWA) of worker exposure to toxic gases and vapors without the use of expensive and hazardous chemicals. Please call 1-614-846-1900 for details.
|
|  |
| CR010MR |
Foxboro Dilution Probe |
|
|
Reconditioned Price:
Call
|
|
| The Foxboro dilution probe enables OVA or TVA
operators to dilute (10/1, 25/1, 50/1) the volume of
the incoming sample with make-up �zero� air. This
allows measurement of higher concentrations or for
use in reduced oxygen sampling. Please call 1-614-846-1900 for details.
Rental Rates
| Daily | Weekly | Monthly |
| $35.00 | $75.00 | $199.00 |
|
|  |
| 0038 |
Foxboro OVA Strip Chart Recorder |
|
|
Reconditioned Price:
Call
|
|
| The Foxboro OVA Strip Chart Recorder is an
intrinsically safe recorder for the Century series
analyzers. Specify linear (128/ 128GC) or logrithmic
(108/108GC).
Pressure sensitive chart paper is $24.99 per roll.
Intrinsically Safe. Please call 1-614-846-1900 for details.
Rental Rates
| Daily | Weekly | Monthly |
| $50.00 | $95.00 | $280.00 |
|
|  |
| 0039 |
Foxboro charcoal filter adapter |
|
|
Reconditioned Price:
Call
|
|
| The Foxboro charcoal filter adapter allows for
scrubbing of non-methane components while allowing
for the methane component to be measured by either
the OVA or TVA - 1000 analyzer. Easily replaces the
close area sampler. Please call 1-614-846-1900 for details.
Rental Rates
| Daily | Weekly | Monthly |
| $15.00 | $25.00 | $45.00 |
|
|  |
| 1021 |
HNU 10.2 eV PID Lamp |
|
|
Reconditioned Price:
$378.00
|
|
| Unused and working P.I.D. lamp from a government surplus. Tested and passed QA. Includes 30-day limited warranty. Please call 1-614-846-1900 for details.
|
|  |
| PI52 |
HNU PI-52 |
|
|
Reconditioned Price:
$1,999.00
|
|
| The HNU PI-52 Controller is an add on PID detector
adaptable for most benchtop gas chromatographs.
Operates at temperatures up to 300 degree C which
gives the detector a higher range of detectable
compounds. The lower limits of detection are 10 to
100 times better than those of an FID. The PID is a
non-destructive detector and may be put in series
with another detector. Utilizes a standard HNU 10.2
or 11.7 PID lamp. PID lamps are sold separately (PID
Accessories). Please call 1-614-846-1900 for details.
|
|  |
| |
HP FID |
|
|
Reconditioned Price:
Call
|
|
| Hewlett-Packard Flame Ionization Detector FID. Please call 1-614-846-1900 for details.
|
|  |
|
|  |
| 103H |
Miran Halothane Filter for 103 |
|
|
Reconditioned Price:
$750.00
|
|
| Miran 103 Filter. Includes filter and insertable meter plate. Please call 1-614-846-1900 for details.
|
|  |
| M103 |
Miran 103 |
|
|
Reconditioned Price:
Call
|
|
| Includes one filter of your choice: Ethylene Oxide, Formaldehyde, or Halothane. Additional filters available for $750.00 each. Please call 1-614-846-1900 for details.
|
|  |
|
|  |
| 4430 |
O.I. Analytical 4430 |
|
|
Reconditioned Price:
Call
|
|
| O.I. Analytical 4430 PID contoller/detector assembly for purchase with a GC system. Please call 1-614-846-1900 for details.
|
|  |
| |
O.I. Analytical 4420 |
|
|
Reconditioned Price:
Call
|
|
| O.I 4420 Electrolytic Conductivity Detector and
contoller assembly. Please call 1-614-846-1900 for details.
|
|  |
| OI5240 |
O.I. Analytical 5240 |
|
|
Reconditioned Price:
Call
|
|
| The O.I. Model 5240 is a tandem PID and ELCD detector
for the HP 5890 Series gas chromatographs. Enhanced
capillary performance is gained by mounting the
detectors together. This minimizes dead volume and
interfacing between the detectors. The PID uses the
ELCD reaction gas as a sweep gas and allows the
column bakeout from the PID and ELCD to be vented.
Eliminates transfer lines and uses only one detector
port. Also available: Model 5230 - PID detector only. Model 5220 - ELCD detector only. Please call 1-614-846-1900 for details.
|
|  |
|
| |
|
| |
|
| |
| 0036 |
Portable Isothermal Pack |
|
|
Reconditioned Price:
Call
|
|
| The Portable Isothermal Pack is a selection of 3
isothermally controlled columns for the Foxboro OVA.
Temperature is maintained at either 0 degrees C or 40
degrees C for temperature stabilization of the
chromatography column. Please call 1-614-846-1900 for details.
Rental Rates
| Daily | Weekly | Monthly |
| $50.00 | $95.00 | $280.00 |
|
|  |
| 106583 |
Solinst 3002 Rain Gauge Logger |
| |
|
Price:
Call
|
|
| The Solinst Rain Logger is designed for use with Solinst Levelogger software and almost any conventional tipping-bucket rain gauge with a reed switch output. This allows rainfall to be monitored conveniently as well as water levels. For high accuracy, the Rain Logger counts rain bucket tips in micrometers (µm), then expresses readings in mm/period. The linear sampling rate can be set anywhere between 10 - 90 minutes. The 2-channel logger also determines the rainfall total for each 5 minutes and calculates the Peak Rainfall Rate for each sample period. When the Rain Logger is connected to a computer using the PC Interface Cable and the Levelogger software is launched, the program recognizes the Rain Logger and displays the instrument type and number. It uses Channel 1 to indicate rain for the period and Channel 2 for the peak rain rate. If the logger has previously been programmed, the location identifier, sample rate and calibration constant entered will also be displayed. If not, these can be entered and the logger started (Start Now). When data is to be downloaded just go to the data control window. The downloaded data can then be exported easily to other programs. Uploading Data: The logged data is kept in non-volatile memory and can be collected using a Leveloader data-transfer unit, or uploaded directly to a computer using a PC Interface Cable. Alternatively, for automatic remote data collection, it may be uploaded via a Solinst Telemetry System (STS), together with Levelogger and Barologger data if desired. STS Telemetry System: The Rain Logger uses a standard 9 V battery to wake the logger briefly every minute. It calculates the time segment totals and peaks, and flashes an LED, which indicates that the logger is working properly. This replaceable battery should last for 1-2 years and the remaining battery level is also viewable in the Levelogger software. A real-time clock inside the Rain Logger is operated from a separate battery with a lifetime of over 15 yrs. SPECIFICATIONS: Case: Polycarbonate, Nema4X water-resistant, 2.5” cube (65 mm) Power: Internal replaceable 9V alkaline battery, typical 1-2 yrs life. 3V Lithium battery for clock operation, typically 15 yr life. Temperature: -20 to +70 C operating temperatures. Rain Gauge Connector: Watertight DIN brass with 1m cable. Serial Port Connector: Stainless steel PC Interface Cable. Lamps: Single LED, flashing once per minute if logging. Isolation: 2000 VDC optical isolation, serial port to Rain Gauge connector. Communications: Serial 9600 baud Solinst Levelogger Protocol for readings and logged data. Memory: Flash memory, 24,000 readings sets (Time, Total Rain and Peak Rain). Please call 1-614-846-1900 for more details.
|
|  |
| 102412 |
Solinst 615S Replacement Shield 1' |
| |
|
Price:
Call
|
|
| The Model 615 Drive-Point Piezometers are designed to give field personnel a truly inexpensive method to monitor groundwater in suitable conditions. Solinst 615 Drive-Point Piezometers attach to inexpensive 3/4" NPT steel drive pipe which is widely available through local plumbing and hardware stores. Solinst Drive-Point Piezometers are most often installed permanently as wells, for short-term or long-term monitoring of groundwater level and quality. They can also be used once and removed. Drive-point, tubing and pipe alternatives are available to suit almost every situation. High quality samples can be obtained as polyethylene or Teflon® lined tubing is attached to the stainless steel drive point piezometers. A shielded version is available which avoids clogging or smearing of the screen during installation. Sampling and head measurements are taken within the tubing with small diameter equipment. Solinst Drive-Point Piezometers can be driven into the ground, or the soil at the bottom of a borehole with any direct push or drilling technology, including a vibrating power hammer or the manual slide hammer shown at right. Please call 1-614-846-1900.
|
|  |
| 105823 |
Solinst Barologger M1.5, F5 |
| |
|
Price:
Call
|
|
| The Barologger is available to provide the most accurate and easy method of barometric compensation with the Solinst Levelogger.
|
|  |
| 102174 |
Solinst 615 Manual Slide Hammer 25 lbs |
| |
|
Price:
Call
|
|
| For the most inexpensive wellpoint installations, the Solinst Manual Slide Hammer can be used to install the Solinst Drive-Point Piezometers without the need for any expensive equipment on site. The slide hammer and all other equipment can easily be transported in a car or truck to most sites. A heavy duty drive head is used, on which the slide hammer impacts, and a tubing by-pass ensures that the tubing does not get damaged during installation. A vibrating power hammer can also be used for installation of drive-point. Please call 1-614-846-1900 for details.
|
|  |
| 101387 |
Solinst Manual Drive Head |
| |
|
Price:
Call
|
|
| For the most inexpensive wellpoint installations, the Solinst Manual Slide Hammer can be used to install the Solinst Drive-Point Piezometers without the need for any expensive equipment on site. The slide hammer and all other equipment can easily be transported in a car or truck to most sites. A heavy duty drive head is used, on which the slide hammer impacts, and a tubing by-pass ensures that the tubing does not get damaged during installation. A vibrating power hammer can also be used for installation of drive-point. Please call 1-614-846-1900 for details.
|
|  |
|
| |
|
| |
|
| |
| |
Solinst Leveloader I |
| |
|
Price:
Call
|
|
| The original Leveloader remains available from Solinst but is now called the Solinst Leveloader I. A simple RS232 data transfer device, it is a lower cost option for basic operations. It performs four important functions: displays the last data reading, downloads data from the Levelogger, uploads data to a PC, and can restart a Levelogger using the existing sampling setup. The Levelogger’s Free Memory is shown on screen to help you decide whether to restart the Levelogger for the next monitoring period, or retain the Levelogger data as a useful backup when sufficient free memory is available. If the Levelogger memory becomes full, the Levelogger will stop logging. Restarting a Levelogger erases all previously collected data in the Levelogger itself. The Leveloader I memory can be cleared using the Levelogger Software after each successful upload to a PC. Please call 1-614-846-1900 for more details.
|
|  |
| 104370 |
Solinst 615S Replacement Shield 6" |
| |
|
Price:
Call
|
|
| The Model 615 Drive-Point Piezometers are designed to give field personnel a truly inexpensive method to monitor groundwater in suitable conditions. Solinst 615 Drive-Point Piezometers attach to inexpensive 3/4" NPT steel drive pipe which is widely available through local plumbing and hardware stores. Solinst Drive-Point Piezometers are most often installed permanently as wells, for short-term or long-term monitoring of groundwater level and quality. They can also be used once and removed. Drive-point, tubing and pipe alternatives are available to suit almost every situation. High quality samples can be obtained as polyethylene or Teflon® lined tubing is attached to the stainless steel drive point piezometers. A shielded version is available which avoids clogging or smearing of the screen during installation. Sampling and head measurements are taken within the tubing with small diameter equipment. Solinst Drive-Point Piezometers can be driven into the ground, or the soil at the bottom of a borehole with any direct push or drilling technology, including a vibrating power hammer or the manual slide hammer shown at right. Please call 1-614-846-1900.
|
|  |
|
| |
|
|  |
|
| |
|
| |
|
| |
|
|  |
|
| |
| 102932 |
Solinst 615 Manual Drive Head Assembly |
| |
|
Price:
Call
|
|
| Includes: Drive Head, Tubing By-pass, and 2' ss extension. For the most inexpensive wellpoint installations, the Solinst Manual Slide Hammer can be used to install the Solinst Drive-Point Piezometers without the need for any expensive equipment on site. The slide hammer and all other equipment can easily be transported in a car or truck to most sites. A heavy duty drive head is used, on which the slide hammer impacts, and a tubing by-pass ensures that the tubing does not get damaged during installation. A vibrating power hammer can also be used for installation of drive-point. Please call 1-614-846-1900 for details.
|
|  |
| |
Solinst Leveloader II |
| |
|
Price:
Call
|
|
| The Solinst Leveloader II is a more sophisticated and advanced version of Solinst's first Leveloader. It is a data transfer unit for all versions of the Solinst Leveloggers, Barologgers and Rain Loggers.
Leveloader II stores and transfers more data, more rapidly, from all past and present Levelogger models and allows more functionality, including reprogramming of Levelogger sampling regimes, altitude, instrument location and offers the option of password protection.
Allows reprogramming of sampling setup, with Start(now) and Future Start options. Allows scrolling through tabular data in the field. 2 Mb data flash memory. Battery status and memory status all shown in real-time. Real-time clock allows synchronization of Leveloggers to each other and to a PC. Downloads twice the amount of data and does it twice as fast as Leveloader I. High-speed data transfer to a PC. Works with all past and present versions of Levelogger and Rain Logger. It provides more critical information, such as battery levels and remaining memory information in real-time for both the Levelogger and the Leveloader II. Data in chart form can be scrolled in real-time before storing. You can also synchronize the Levelogger time to the Leveloader II time, perform a "Start" or "Future Start," and erase last log files. These new features provide the user with the functionality needed in a portable hand-held data transfer device. Please call 1-614-846-1900 for details.
|
|  |
| 5010 |
Tekmar 5010 Automatic Disorber |
|
|
Reconditioned Price:
Call
|
|
| Automatic On-Line Disorber, 110V, with 5/8" Furnace, including Cryofocusing Module, 2 meters 0.32mm I.D. uncoated fused silica, 0.5mm I.D. glass-lined zero dead volume union.
Please call 1-614-846-1900 for details.
|
|  |
| 8026 |
TSI Particle Generator |
|
|
Reconditioned Price:
Call
|
|
| The TSI 8026 particle generator produces a non-detectable, low concentration salt (NaCl) aerosol in the proper size range for the PORTACOUNT or N95-Companion. Since the aerosol output of the particle generator is limited, its use restricts fit testing activities to an average-size room. Please call 1-614-846-1900 for details.
|
|  |
| 503 |
VALCO Manual 6-Port Valve |
|
|
Reconditioned Price:
$500.00
|
|
| VICI VALCOVALVE 6 Port 350 Degree GC INJECTION VALVE. VALVE NEW IN THE BOX. Please call 1-614-846-1900 for details.
|
|  |
