|
| |
| 104370 |
Solinst 615S Replacement Shield 6" |
 |
|
Price:
Call
|
|
| The Model 615 Drive-Point Piezometers are designed to give field personnel a truly inexpensive method to monitor groundwater in suitable conditions. Solinst 615 Drive-Point Piezometers attach to inexpensive 3/4" NPT steel drive pipe which is widely available through local plumbing and hardware stores. Solinst Drive-Point Piezometers are most often installed permanently as wells, for short-term or long-term monitoring of groundwater level and quality. They can also be used once and removed. Drive-point, tubing and pipe alternatives are available to suit almost every situation. High quality samples can be obtained as polyethylene or Teflon® lined tubing is attached to the stainless steel drive point piezometers. A shielded version is available which avoids clogging or smearing of the screen during installation. Sampling and head measurements are taken within the tubing with small diameter equipment. Solinst Drive-Point Piezometers can be driven into the ground, or the soil at the bottom of a borehole with any direct push or drilling technology, including a vibrating power hammer or the manual slide hammer shown at right. Please call 1-614-846-1900.
|
|  |
|
| |
| 102174 |
Solinst 615 Manual Slide Hammer 25 lbs |
| |
|
Price:
Call
|
|
| For the most inexpensive wellpoint installations, the Solinst Manual Slide Hammer can be used to install the Solinst Drive-Point Piezometers without the need for any expensive equipment on site. The slide hammer and all other equipment can easily be transported in a car or truck to most sites. A heavy duty drive head is used, on which the slide hammer impacts, and a tubing by-pass ensures that the tubing does not get damaged during installation. A vibrating power hammer can also be used for installation of drive-point. Please call 1-614-846-1900 for details.
|
|  |
| 101387 |
Solinst Manual Drive Head |
| |
|
Price:
Call
|
|
| For the most inexpensive wellpoint installations, the Solinst Manual Slide Hammer can be used to install the Solinst Drive-Point Piezometers without the need for any expensive equipment on site. The slide hammer and all other equipment can easily be transported in a car or truck to most sites. A heavy duty drive head is used, on which the slide hammer impacts, and a tubing by-pass ensures that the tubing does not get damaged during installation. A vibrating power hammer can also be used for installation of drive-point. Please call 1-614-846-1900 for details.
|
|  |
|
| |
|
| |
| 102412 |
Solinst 615S Replacement Shield 1' |
| |
|
Price:
Call
|
|
| The Model 615 Drive-Point Piezometers are designed to give field personnel a truly inexpensive method to monitor groundwater in suitable conditions. Solinst 615 Drive-Point Piezometers attach to inexpensive 3/4" NPT steel drive pipe which is widely available through local plumbing and hardware stores. Solinst Drive-Point Piezometers are most often installed permanently as wells, for short-term or long-term monitoring of groundwater level and quality. They can also be used once and removed. Drive-point, tubing and pipe alternatives are available to suit almost every situation. High quality samples can be obtained as polyethylene or Teflon® lined tubing is attached to the stainless steel drive point piezometers. A shielded version is available which avoids clogging or smearing of the screen during installation. Sampling and head measurements are taken within the tubing with small diameter equipment. Solinst Drive-Point Piezometers can be driven into the ground, or the soil at the bottom of a borehole with any direct push or drilling technology, including a vibrating power hammer or the manual slide hammer shown at right. Please call 1-614-846-1900.
|
|  |
|
| |
| 102932 |
Solinst 615 Manual Drive Head Assembly |
| |
|
Price:
Call
|
|
| Includes: Drive Head, Tubing By-pass, and 2' ss extension. For the most inexpensive wellpoint installations, the Solinst Manual Slide Hammer can be used to install the Solinst Drive-Point Piezometers without the need for any expensive equipment on site. The slide hammer and all other equipment can easily be transported in a car or truck to most sites. A heavy duty drive head is used, on which the slide hammer impacts, and a tubing by-pass ensures that the tubing does not get damaged during installation. A vibrating power hammer can also be used for installation of drive-point. Please call 1-614-846-1900 for details.
|
|  |
|
|  |
|
| |
|
| |
|
| |
|
|  |
