| 102-0100 |
Solinst 102 Water Level Meter 100' |
 |
|
Price:
Call
|
|
| Reliable and inexpensive, the Solinst Model 102 Water Level Meter has been designed for measuring depth to water in narrow diameter applications. It uses flexible coaxial cable, with a heavy-duty polyethylene jacket. Markings are permanently adhered to the cable at every 5-ft. or 1m. Designed with segmented weights for easy operation in narrow diameter tubes or wells with pumps. Please call 1-614-846-1900 for details.
|
|  |
| 101-50 |
Solinst 101 Water Level Meter 50' |
| |
|
Price:
Call
|
|
| Solinst 101 Water Level Meter tones when the probe comes in contact with water. Tape measured in tenths of inches. Please call 1-614-846-1900 for details.
Rental Rates
| Daily | Weekly | Monthly |
| 35.00 | 55.00 | 165.00 |
|
|  |
| 101-200 |
Solinst 101 Water Level Meter 200' |
| |
|
Price:
Call
|
|
| Solinst 101 Water Level Meter tones when the probe comes in contact with water. Tape measured in tenths of inches. Please call 1-614-846-1900 for details.
Rental Rates
| Daily | Weekly | Monthly |
| 40.00 | 80.00 | 175.00 |
|
|  |
| 101-0500 |
Solinst 101 Water Level Meter 500' |
| |
|
Price:
Call
|
|
| Solinst 101 Water Level Meter tones when the probe comes in contact with water. Tape measured in tenths of inches. Please call 1-614-846-1900 for details.
Rental Rates
| Daily | Weekly | Monthly |
| 45.00 | 90.00 | 275.00 |
|
|  |
| 101-150 |
Solinst 101 Water Level Meter 150' |
| |
|
Price:
Call
|
|
| Solinst 101 Water Level Meter tones when the probe comes in contact with water. Tape measured in tenths of inches. Please call 1-614-846-1900 for details.
Rental Rates
| Daily | Weekly | Monthly |
| 35.00 | 55.00 | 165.00 |
|
|  |
| 101-300 |
Solinst 101 Water Level Meter 300' |
| |
|
Price:
Call
|
|
| Solinst 101 Water Level Meter tones when the probe comes in contact with water. Tape measured in tenths of inches. Please call 1-614-846-1900 for details.
Rental Rates
| Daily | Weekly | Monthly |
| 45.00 | 80.00 | 250.00 |
|
|  |
| 101-100 |
Solinst 101 Water Level Meter 100' |
| |
|
Price:
Call
|
|
| Includes P2 Probe. Ideal for gaining highly accurate measurements of depth to water, the Solinst 101 Water Level Meter uses non-stretch tape with heat embossed markings every 1/100ft or millimeter. The dog-bone design of the tape avoids adherence to wet surfaces, providing accurate readings every time. The stranded stainless steel conductors provide strength and protection against corrosion. Please call 1-614-846-1900 for details.
Rental Rates
| Daily | Weekly | Monthly |
| $35.00 | $55.00 | $165.00 |
|
|  |
| 501-1000 |
Solinst 501 Well Casing Depth Indicator 1000' |
| |
|
Price:
Call
|
|
| Simple, reliable and easy to operate, the Well Casing Depth Indicator uses a magnetic pendulum assembly, making it ideal for measuring the depth at which steel well casing ends. This is useful when hydrofracturing, for measuring the total depth of a well or for confirming well construction. The pendulum assembly completes a circuit that activates a buzzer and light when it detects steel. The Well Casing Depth Indicator has a unique but simple pendulum assembly. The pendulum is housed in a stainless steel probe that is 6”(152.4 mm) in length and 1.5”(38 mm) in diameter. The probe is attached to marked tape and mounted on a well-balanced reel. A 9V battery, located in the convenient battery tray, operates a light and buzzer as the probe is lowered down a steel cased well. When the probe is no longer adjacent to steel casing the signal stops. The depth can then be read from the tape at the top of the well. A tape guide is provided which fits over the top of the well casing to protect the tape from damage and to provide an accurate measurement point. Applications: Hydrofracturing. Installation of telescoping well screen. Measuring total well depth. Decomissioning abandoned wells. Confirming well construction (new and old wells). Please call 1-614-846-1900 for details.
|
|  |
| 102-0150 |
Solinst 102 Water Level Meter 150' |
| |
|
Price:
Call
|
|
| The Solinst Model 102 Water Level Meter has been designed for measuring groundwater levels, especially in small diameter tubes and piezometers. The cable has a heavy duty jacket and stainless steel inner conductor for strength. For situations where highly accurate measurements or speed of reading is more important the Model 101 Flat Tape Water Level Meter is also available. The Model 102 Water Level Meter uses a 9V battery and a small diameter probe on narrow coaxial cable. When the probe enters water the electrical circuit is completed, sending a signal back to the reel where a light and clearly audible buzzer are activated. The water level is then determined by taking a reading off the cable at the top of the borehole, casing or tube and by accounting for the distance from the point of measurement to the nearest marking on the cable. Please call 1-614-846-1900 for details.
|
|  |
| 102-0650 |
Solinst 102 Water Level Meter 650' |
| |
|
Price:
Call
|
|
| The Solinst Model 102 Water Level Meter has been designed for measuring groundwater levels, especially in small diameter tubes and piezometers. The cable has a heavy duty jacket and stainless steel inner conductor for strength. For situations where highly accurate measurements or speed of reading is more important the Model 101 Flat Tape Water Level Meter is also available. The Model 102 Water Level Meter uses a 9V battery and a small diameter probe on narrow coaxial cable. When the probe enters water the electrical circuit is completed, sending a signal back to the reel where a light and clearly audible buzzer are activated. The water level is then determined by taking a reading off the cable at the top of the borehole, casing or tube and by accounting for the distance from the point of measurement to the nearest marking on the cable. Please call 1-614-846-1900 for details.
|
|  |
|
|  |
| 501-100 |
Solinst 501 Well Casing Depth Indicator 100' |
| |
|
Price:
Call
|
|
| Simple, reliable and easy to operate, the Well Casing Depth Indicator uses a magnetic pendulum assembly, making it ideal for measuring the depth at which steel well casing ends. This is useful when hydrofracturing, for measuring the total depth of a well or for confirming well construction. The pendulum assembly completes a circuit that activates a buzzer and light when it detects steel. The Well Casing Depth Indicator has a unique but simple pendulum assembly. The pendulum is housed in a stainless steel probe that is 6”(152.4 mm) in length and 1.5”(38 mm) in diameter. The probe is attached to marked tape and mounted on a well-balanced reel. A 9V battery, located in the convenient battery tray, operates a light and buzzer as the probe is lowered down a steel cased well. When the probe is no longer adjacent to steel casing the signal stops. The depth can then be read from the tape at the top of the well. A tape guide is provided which fits over the top of the well casing to protect the tape from damage and to provide an accurate measurement point. Applications: Hydrofracturing. Installation of telescoping well screen. Measuring total well depth. Decomissioning abandoned wells. Confirming well construction (new and old wells). Please call 1-614-846-1900 for details.
|
|  |
| 101-1500 |
Solinst 101 Water Level Meter 1500' |
| |
|
Price:
Call
|
|
| Solinst 101 Water Level Meter tones when the probe comes in contact with water. Tape measured in tenths of inches. Please call 1-614-846-1900 for details.
|
|  |
| 103-0050 |
Solinst 103 Tag Line 50' |
| |
|
Price:
Call
|
|
| The Solinst Tag Line uses a weight attached to marked cable, and is designed for use in the installation of monitoring wells. It can be used to measure the depth to the bottom of a well, or the depth to the top of a backfill sand or bentonite layer during completion of a well. The Solinst 103 Tag Line uses 1/16” (1.6 mm.) stranded stainless steel wireline with a minimum break strength of 270 lbs. (122 Kg.). The 304 stainless steel weight is 1.5 lbs. (680 g). It has tapered ends to minimize hang-ups during deployment and return to surface and can be clipped on and off the cable. This allows the use of the reel-mounted, marked cable for other uses, such as bailer deployment. The cable is mounted on a sturdy, free-standing reel with a carrying handle, weight holder and a brake. Ideal for use when installing Solinst Model 403 CMT Multilevel Systems, the tag line comes in a standard length of 100 ft to 1000 ft (30 m to 300 m), but is also available in longer lengths, on request. Please call 1-614-846-1900 for details.
|
|  |
| 103-0100 |
Solinst 103 Tag Line 100' |
| |
|
Price:
Call
|
|
| The Solinst Tag Line uses a weight attached to marked cable, and is designed for use in the installation of monitoring wells. It can be used to measure the depth to the bottom of a well, or the depth to the top of a backfill sand or bentonite layer during completion of a well. The Solinst 103 Tag Line uses 1/16” (1.6 mm.) stranded stainless steel wireline with a minimum break strength of 270 lbs. (122 Kg.). The 304 stainless steel weight is 1.5 lbs. (680 g). It has tapered ends to minimize hang-ups during deployment and return to surface and can be clipped on and off the cable. This allows the use of the reel-mounted, marked cable for other uses, such as bailer deployment.
The cable is mounted on a sturdy, free-standing reel with a carrying handle, weight holder and a brake.
Ideal for use when installing Solinst Model 403 CMT Multilevel Systems, the tag line comes in a standard length of 100 ft to 1000 ft (30 m to 300 m), but is also available in longer lengths, on request. Please call 1-614-846-1900 for details.
|
|  |
| 103-0300 |
Solinst 103 Tag Line 300' |
| |
|
Price:
Call
|
|
| The Solinst Tag Line uses a weight attached to marked cable, and is designed for use in the installation of monitoring wells. It can be used to measure the depth to the bottom of a well, or the depth to the top of a backfill sand or bentonite layer during completion of a well. The Solinst 103 Tag Line uses 1/16” (1.6 mm.) stranded stainless steel wireline with a minimum break strength of 270 lbs. (122 Kg.). The 304 stainless steel weight is 1.5 lbs. (680 g). It has tapered ends to minimize hang-ups during deployment and return to surface and can be clipped on and off the cable. This allows the use of the reel-mounted, marked cable for other uses, such as bailer deployment.
The cable is mounted on a sturdy, free-standing reel with a carrying handle, weight holder and a brake.
Ideal for use when installing Solinst Model 403 CMT Multilevel Systems, the tag line comes in a standard length of 100 ft to 1000 ft (30 m to 300 m), but is also available in longer lengths, on request. Please call 1-614-846-1900 for details.
|
|  |
| 103-0400 |
Solinst 103 Tag Line 400' |
| |
|
Price:
Call
|
|
| The Solinst Tag Line uses a weight attached to marked cable, and is designed for use in the installation of monitoring wells. It can be used to measure the depth to the bottom of a well, or the depth to the top of a backfill sand or bentonite layer during completion of a well. The Solinst 103 Tag Line uses 1/16” (1.6 mm.) stranded stainless steel wireline with a minimum break strength of 270 lbs. (122 Kg.). The 304 stainless steel weight is 1.5 lbs. (680 g). It has tapered ends to minimize hang-ups during deployment and return to surface and can be clipped on and off the cable. This allows the use of the reel-mounted, marked cable for other uses, such as bailer deployment.
The cable is mounted on a sturdy, free-standing reel with a carrying handle, weight holder and a brake.
Ideal for use when installing Solinst Model 403 CMT Multilevel Systems, the tag line comes in a standard length of 100 ft to 1000 ft (30 m to 300 m), but is also available in longer lengths, on request. Please call 1-614-846-1900 for details.
|
|  |
| 103-0650 |
Solinst 103 Tag Line 650' |
| |
|
Price:
Call
|
|
| The Solinst Tag Line uses a weight attached to marked cable, and is designed for use in the installation of monitoring wells. It can be used to measure the depth to the bottom of a well, or the depth to the top of a backfill sand or bentonite layer during completion of a well. The Solinst 103 Tag Line uses 1/16 (1.6 mm.) stranded stainless steel wireline with a minimum break strength of 270 lbs. (122 Kg.). The 304 stainless steel weight is 1.5 lbs. (680 g). It has tapered ends to minimize hang-ups during deployment and return to surface and can be clipped on and off the cable. This allows the use of the reel-mounted, marked cable for other uses, such as bailer deployment.
The cable is mounted on a sturdy, free-standing reel with a carrying handle, weight holder and a brake.
Ideal for use when installing Solinst Model 403 CMT Multilevel Systems, the tag line comes in a standard length of 100 ft to 1000 ft (30 m to 300 m), but is also available in longer lengths, on request. Please call 1-614-846-1900 for details.
|
|  |
|
|  |
| 501-050 |
Solinst 501 Well Casing Depth Indicator 50' |
| |
|
Price:
Call
|
|
| Simple, reliable and easy to operate, the Well Casing Depth Indicator uses a magnetic pendulum assembly, making it ideal for measuring the depth at which steel well casing ends. This is useful when hydrofracturing, for measuring the total depth of a well or for confirming well construction. The pendulum assembly completes a circuit that activates a buzzer and light when it detects steel. The Well Casing Depth Indicator has a unique but simple pendulum assembly. The pendulum is housed in a stainless steel probe that is 6”(152.4 mm) in length and 1.5”(38 mm) in diameter. The probe is attached to marked tape and mounted on a well-balanced reel. A 9V battery, located in the convenient battery tray, operates a light and buzzer as the probe is lowered down a steel cased well. When the probe is no longer adjacent to steel casing the signal stops. The depth can then be read from the tape at the top of the well. A tape guide is provided which fits over the top of the well casing to protect the tape from damage and to provide an accurate measurement point. Applications: Hydrofracturing. Installation of telescoping well screen. Measuring total well depth. Decomissioning abandoned wells. Confirming well construction (new and old wells). Please call 1-614-846-1900 for details.
|
|  |
| 501-400 |
Solinst 501 Well Casing Depth Indicator 400' |
| |
|
Price:
Call
|
|
| Simple, reliable and easy to operate, the Well Casing Depth Indicator uses a magnetic pendulum assembly, making it ideal for measuring the depth at which steel well casing ends. This is useful when hydrofracturing, for measuring the total depth of a well or for confirming well construction. The pendulum assembly completes a circuit that activates a buzzer and light when it detects steel. The Well Casing Depth Indicator has a unique but simple pendulum assembly. The pendulum is housed in a stainless steel probe that is 6”(152.4 mm) in length and 1.5”(38 mm) in diameter. The probe is attached to marked tape and mounted on a well-balanced reel. A 9V battery, located in the convenient battery tray, operates a light and buzzer as the probe is lowered down a steel cased well. When the probe is no longer adjacent to steel casing the signal stops. The depth can then be read from the tape at the top of the well. A tape guide is provided which fits over the top of the well casing to protect the tape from damage and to provide an accurate measurement point. Applications: Hydrofracturing. Installation of telescoping well screen. Measuring total well depth. Decomissioning abandoned wells. Confirming well construction (new and old wells). Please call 1-614-846-1900 for details.
|
|  |
| 501-500 |
Solinst 501 Well Casing Depth Indicator 500' |
| |
|
Price:
Call
|
|
| Simple, reliable and easy to operate, the Well Casing Depth Indicator uses a magnetic pendulum assembly, making it ideal for measuring the depth at which steel well casing ends. This is useful when hydrofracturing, for measuring the total depth of a well or for confirming well construction. The pendulum assembly completes a circuit that activates a buzzer and light when it detects steel. The Well Casing Depth Indicator has a unique but simple pendulum assembly. The pendulum is housed in a stainless steel probe that is 6”(152.4 mm) in length and 1.5”(38 mm) in diameter. The probe is attached to marked tape and mounted on a well-balanced reel. A 9V battery, located in the convenient battery tray, operates a light and buzzer as the probe is lowered down a steel cased well. When the probe is no longer adjacent to steel casing the signal stops. The depth can then be read from the tape at the top of the well. A tape guide is provided which fits over the top of the well casing to protect the tape from damage and to provide an accurate measurement point. Applications: Hydrofracturing. Installation of telescoping well screen. Measuring total well depth. Decomissioning abandoned wells. Confirming well construction (new and old wells). Please call 1-614-846-1900 for details.
|
|  |
| 501-650 |
Solinst 501 Well Casing Depth Indicator 650' |
| |
|
Price:
Call
|
|
| Simple, reliable and easy to operate, the Well Casing Depth Indicator uses a magnetic pendulum assembly, making it ideal for measuring the depth at which steel well casing ends. This is useful when hydrofracturing, for measuring the total depth of a well or for confirming well construction. The pendulum assembly completes a circuit that activates a buzzer and light when it detects steel. The Well Casing Depth Indicator has a unique but simple pendulum assembly. The pendulum is housed in a stainless steel probe that is 6”(152.4 mm) in length and 1.5”(38 mm) in diameter. The probe is attached to marked tape and mounted on a well-balanced reel. A 9V battery, located in the convenient battery tray, operates a light and buzzer as the probe is lowered down a steel cased well. When the probe is no longer adjacent to steel casing the signal stops. The depth can then be read from the tape at the top of the well. A tape guide is provided which fits over the top of the well casing to protect the tape from damage and to provide an accurate measurement point. Applications: Hydrofracturing. Installation of telescoping well screen. Measuring total well depth. Decomissioning abandoned wells. Confirming well construction (new and old wells). Please call 1-614-846-1900 for details.
|
|  |
| 102-0050 |
Solinst 102 Water Level Meter 50' |
| |
|
Price:
Call
|
|
| The Solinst Model 102 Water Level Meter has been designed for measuring groundwater levels, especially in small diameter tubes and piezometers. The cable has a heavy duty jacket and stainless steel inner conductor for strength. For situations where highly accurate measurements or speed of reading is more important the Model 101 Flat Tape Water Level Meter is also available. The Model 102 Water Level Meter uses a 9V battery and a small diameter probe on narrow coaxial cable. When the probe enters water the electrical circuit is completed, sending a signal back to the reel where a light and clearly audible buzzer are activated. The water level is then determined by taking a reading off the cable at the top of the borehole, casing or tube and by accounting for the distance from the point of measurement to the nearest marking on the cable. Please call 1-614-846-1900 for details.
|
|  |
| 102-0200 |
Solinst 102 Water Level Meter 200' |
| |
|
Price:
Call
|
|
| The Solinst Model 102 Water Level Meter has been designed for measuring groundwater levels, especially in small diameter tubes and piezometers. The cable has a heavy duty jacket and stainless steel inner conductor for strength. For situations where highly accurate measurements or speed of reading is more important the Model 101 Flat Tape Water Level Meter is also available. The Model 102 Water Level Meter uses a 9V battery and a small diameter probe on narrow coaxial cable. When the probe enters water the electrical circuit is completed, sending a signal back to the reel where a light and clearly audible buzzer are activated. The water level is then determined by taking a reading off the cable at the top of the borehole, casing or tube and by accounting for the distance from the point of measurement to the nearest marking on the cable. Please call 1-614-846-1900 for details.
|
|  |
| 102-0300 |
Solinst 102 Water Level Meter 300' |
| |
|
Price:
Call
|
|
| The Solinst Model 102 Water Level Meter has been designed for measuring groundwater levels, especially in small diameter tubes and piezometers. The cable has a heavy duty jacket and stainless steel inner conductor for strength. For situations where highly accurate measurements or speed of reading is more important the Model 101 Flat Tape Water Level Meter is also available. The Model 102 Water Level Meter uses a 9V battery and a small diameter probe on narrow coaxial cable. When the probe enters water the electrical circuit is completed, sending a signal back to the reel where a light and clearly audible buzzer are activated. The water level is then determined by taking a reading off the cable at the top of the borehole, casing or tube and by accounting for the distance from the point of measurement to the nearest marking on the cable. Please call 1-614-846-1900 for details.
|
|  |
| 102-400 |
Solinst 102 Water Level Meter 400' |
| |
|
Price:
Call
|
|
| The Solinst Model 102 Water Level Meter has been designed for measuring groundwater levels, especially in small diameter tubes and piezometers. The cable has a heavy duty jacket and stainless steel inner conductor for strength. For situations where highly accurate measurements or speed of reading is more important the Model 101 Flat Tape Water Level Meter is also available. The Model 102 Water Level Meter uses a 9V battery and a small diameter probe on narrow coaxial cable. When the probe enters water the electrical circuit is completed, sending a signal back to the reel where a light and clearly audible buzzer are activated. The water level is then determined by taking a reading off the cable at the top of the borehole, casing or tube and by accounting for the distance from the point of measurement to the nearest marking on the cable. Please call 1-614-846-1900 for details.
|
|  |
| 102-0500 |
Solinst 102 Water Level Meter 500' |
| |
|
Price:
Call
|
|
| The Solinst Model 102 Water Level Meter has been designed for measuring groundwater levels, especially in small diameter tubes and piezometers. The cable has a heavy duty jacket and stainless steel inner conductor for strength. For situations where highly accurate measurements or speed of reading is more important the Model 101 Flat Tape Water Level Meter is also available. The Model 102 Water Level Meter uses a 9V battery and a small diameter probe on narrow coaxial cable. When the probe enters water the electrical circuit is completed, sending a signal back to the reel where a light and clearly audible buzzer are activated. The water level is then determined by taking a reading off the cable at the top of the borehole, casing or tube and by accounting for the distance from the point of measurement to the nearest marking on the cable. Please call 1-614-846-1900 for details.
|
|  |
| 102-0750 |
Solinst 102 Water Level Meter 100' |
| |
|
Price:
Call
|
|
| The Solinst Model 102 Water Level Meter has been designed for measuring groundwater levels, especially in small diameter tubes and piezometers. The cable has a heavy duty jacket and stainless steel inner conductor for strength. For situations where highly accurate measurements or speed of reading is more important the Model 101 Flat Tape Water Level Meter is also available. The Model 102 Water Level Meter uses a 9V battery and a small diameter probe on narrow coaxial cable. When the probe enters water the electrical circuit is completed, sending a signal back to the reel where a light and clearly audible buzzer are activated. The water level is then determined by taking a reading off the cable at the top of the borehole, casing or tube and by accounting for the distance from the point of measurement to the nearest marking on the cable. Please call 1-614-846-1900 for details.
|
|  |
| 102-1000 |
Solinst 102 Water Level Meter 1000' |
| |
|
Price:
Call
|
|
| The Solinst Model 102 Water Level Meter has been designed for measuring groundwater levels, especially in small diameter tubes and piezometers. The cable has a heavy duty jacket and stainless steel inner conductor for strength. For situations where highly accurate measurements or speed of reading is more important the Model 101 Flat Tape Water Level Meter is also available. The Model 102 Water Level Meter uses a 9V battery and a small diameter probe on narrow coaxial cable. When the probe enters water the electrical circuit is completed, sending a signal back to the reel where a light and clearly audible buzzer are activated. The water level is then determined by taking a reading off the cable at the top of the borehole, casing or tube and by accounting for the distance from the point of measurement to the nearest marking on the cable. Please call 1-614-846-1900 for details.
|
|  |
| 101-1250 |
Solinst 101 Water Level Meter 1250' |
| |
|
Price:
Call
|
|
| Solinst 101 Water Level Meter tones when the probe comes in contact with water. Tape measured in tenths of inches. Please call 1-614-846-1900 for details.
|
|  |
| 101-1650 |
Solinst 101 Water Level Meter 1650' |
| |
|
Price:
Call
|
|
| Solinst 101 Water Level Meter tones when the probe comes in contact with water. Tape measured in tenths of inches. Please call 1-614-846-1900 for details.
|
|  |
| 101-2000 |
Solinst 101 Water Level Meter 2000' |
| |
|
Price:
Call
|
|
| Solinst 101 Water Level Meter tones when the probe comes in contact with water. Tape measured in tenths of inches. Please call 1-614-846-1900 for details.
|
|  |
| 103-0150 |
Solinst 103 Tag Line 150' |
| |
|
Price:
Call
|
|
| The Solinst Tag Line uses a weight attached to marked cable, and is designed for use in the installation of monitoring wells. It can be used to measure the depth to the bottom of a well, or the depth to the top of a backfill sand or bentonite layer during completion of a well. The Solinst 103 Tag Line uses 1/16” (1.6 mm.) stranded stainless steel wireline with a minimum break strength of 270 lbs. (122 Kg.). The 304 stainless steel weight is 1.5 lbs. (680 g). It has tapered ends to minimize hang-ups during deployment and return to surface and can be clipped on and off the cable. This allows the use of the reel-mounted, marked cable for other uses, such as bailer deployment.
The cable is mounted on a sturdy, free-standing reel with a carrying handle, weight holder and a brake.
Ideal for use when installing Solinst Model 403 CMT Multilevel Systems, the tag line comes in a standard length of 100 ft to 1000 ft (30 m to 300 m), but is also available in longer lengths, on request. Please call 1-614-846-1900 for details.
|
|  |
| 103-0200 |
Solinst 103 Tag Line 200' |
| |
|
Price:
Call
|
|
| The Solinst Tag Line uses a weight attached to marked cable, and is designed for use in the installation of monitoring wells. It can be used to measure the depth to the bottom of a well, or the depth to the top of a backfill sand or bentonite layer during completion of a well. The Solinst 103 Tag Line uses 1/16” (1.6 mm.) stranded stainless steel wireline with a minimum break strength of 270 lbs. (122 Kg.). The 304 stainless steel weight is 1.5 lbs. (680 g). It has tapered ends to minimize hang-ups during deployment and return to surface and can be clipped on and off the cable. This allows the use of the reel-mounted, marked cable for other uses, such as bailer deployment.
The cable is mounted on a sturdy, free-standing reel with a carrying handle, weight holder and a brake.
Ideal for use when installing Solinst Model 403 CMT Multilevel Systems, the tag line comes in a standard length of 100 ft to 1000 ft (30 m to 300 m), but is also available in longer lengths, on request. Please call 1-614-846-1900 for details.
|
|  |
| 103-0250 |
Solinst 103 Tag Line 250' |
| |
|
Price:
Call
|
|
| The Solinst Tag Line uses a weight attached to marked cable, and is designed for use in the installation of monitoring wells. It can be used to measure the depth to the bottom of a well, or the depth to the top of a backfill sand or bentonite layer during completion of a well. The Solinst 103 Tag Line uses 1/16” (1.6 mm.) stranded stainless steel wireline with a minimum break strength of 270 lbs. (122 Kg.). The 304 stainless steel weight is 1.5 lbs. (680 g). It has tapered ends to minimize hang-ups during deployment and return to surface and can be clipped on and off the cable. This allows the use of the reel-mounted, marked cable for other uses, such as bailer deployment.
The cable is mounted on a sturdy, free-standing reel with a carrying handle, weight holder and a brake.
Ideal for use when installing Solinst Model 403 CMT Multilevel Systems, the tag line comes in a standard length of 100 ft to 1000 ft (30 m to 300 m), but is also available in longer lengths, on request. Please call 1-614-846-1900 for details.
|
|  |
| 103-0500 |
Solinst 103 Tag Line 500' |
| |
|
Price:
Call
|
|
| The Solinst Tag Line uses a weight attached to marked cable, and is designed for use in the installation of monitoring wells. It can be used to measure the depth to the bottom of a well, or the depth to the top of a backfill sand or bentonite layer during completion of a well. The Solinst 103 Tag Line uses 1/16” (1.6 mm.) stranded stainless steel wireline with a minimum break strength of 270 lbs. (122 Kg.). The 304 stainless steel weight is 1.5 lbs. (680 g). It has tapered ends to minimize hang-ups during deployment and return to surface and can be clipped on and off the cable. This allows the use of the reel-mounted, marked cable for other uses, such as bailer deployment.
The cable is mounted on a sturdy, free-standing reel with a carrying handle, weight holder and a brake.
Ideal for use when installing Solinst Model 403 CMT Multilevel Systems, the tag line comes in a standard length of 100 ft to 1000 ft (30 m to 300 m), but is also available in longer lengths, on request. Please call 1-614-846-1900 for details.
|
|  |
| 103-0750 |
Solinst 103 Tag Line 750' |
| |
|
Price:
Call
|
|
| The Solinst Tag Line uses a weight attached to marked cable, and is designed for use in the installation of monitoring wells. It can be used to measure the depth to the bottom of a well, or the depth to the top of a backfill sand or bentonite layer during completion of a well. The Solinst 103 Tag Line uses 1/16” (1.6 mm.) stranded stainless steel wireline with a minimum break strength of 270 lbs. (122 Kg.). The 304 stainless steel weight is 1.5 lbs. (680 g). It has tapered ends to minimize hang-ups during deployment and return to surface and can be clipped on and off the cable. This allows the use of the reel-mounted, marked cable for other uses, such as bailer deployment.
The cable is mounted on a sturdy, free-standing reel with a carrying handle, weight holder and a brake.
Ideal for use when installing Solinst Model 403 CMT Multilevel Systems, the tag line comes in a standard length of 100 ft to 1000 ft (30 m to 300 m), but is also available in longer lengths, on request. Please call 1-614-846-1900 for details.
|
|  |
|
|  |
|
|  |
| 501-200 |
Solinst 501 Well Casing Depth Indicator 200' |
| |
|
Price:
Call
|
|
| Simple, reliable and easy to operate, the Well Casing Depth Indicator uses a magnetic pendulum assembly, making it ideal for measuring the depth at which steel well casing ends. This is useful when hydrofracturing, for measuring the total depth of a well or for confirming well construction. The pendulum assembly completes a circuit that activates a buzzer and light when it detects steel. The Well Casing Depth Indicator has a unique but simple pendulum assembly. The pendulum is housed in a stainless steel probe that is 6”(152.4 mm) in length and 1.5”(38 mm) in diameter. The probe is attached to marked tape and mounted on a well-balanced reel. A 9V battery, located in the convenient battery tray, operates a light and buzzer as the probe is lowered down a steel cased well. When the probe is no longer adjacent to steel casing the signal stops. The depth can then be read from the tape at the top of the well. A tape guide is provided which fits over the top of the well casing to protect the tape from damage and to provide an accurate measurement point. Applications: Hydrofracturing. Installation of telescoping well screen. Measuring total well depth. Decomissioning abandoned wells. Confirming well construction (new and old wells). Please call 1-614-846-1900 for details.
|
|  |
| 501-250 |
Solinst 501 Well Casing Depth Indicator 250' |
| |
|
Price:
Call
|
|
| Simple, reliable and easy to operate, the Well Casing Depth Indicator uses a magnetic pendulum assembly, making it ideal for measuring the depth at which steel well casing ends. This is useful when hydrofracturing, for measuring the total depth of a well or for confirming well construction. The pendulum assembly completes a circuit that activates a buzzer and light when it detects steel. The Well Casing Depth Indicator has a unique but simple pendulum assembly. The pendulum is housed in a stainless steel probe that is 6”(152.4 mm) in length and 1.5”(38 mm) in diameter. The probe is attached to marked tape and mounted on a well-balanced reel. A 9V battery, located in the convenient battery tray, operates a light and buzzer as the probe is lowered down a steel cased well. When the probe is no longer adjacent to steel casing the signal stops. The depth can then be read from the tape at the top of the well. A tape guide is provided which fits over the top of the well casing to protect the tape from damage and to provide an accurate measurement point. Applications: Hydrofracturing. Installation of telescoping well screen. Measuring total well depth. Decomissioning abandoned wells. Confirming well construction (new and old wells). Please call 1-614-846-1900 for details.
|
|  |
| 501-0750 |
Solinst 501 Well Casing Depth Indicator 750' |
| |
|
Price:
Call
|
|
| Simple, reliable and easy to operate, the Well Casing Depth Indicator uses a magnetic pendulum assembly, making it ideal for measuring the depth at which steel well casing ends. This is useful when hydrofracturing, for measuring the total depth of a well or for confirming well construction. The pendulum assembly completes a circuit that activates a buzzer and light when it detects steel. The Well Casing Depth Indicator has a unique but simple pendulum assembly. The pendulum is housed in a stainless steel probe that is 6”(152.4 mm) in length and 1.5”(38 mm) in diameter. The probe is attached to marked tape and mounted on a well-balanced reel. A 9V battery, located in the convenient battery tray, operates a light and buzzer as the probe is lowered down a steel cased well. When the probe is no longer adjacent to steel casing the signal stops. The depth can then be read from the tape at the top of the well. A tape guide is provided which fits over the top of the well casing to protect the tape from damage and to provide an accurate measurement point. Applications: Hydrofracturing. Installation of telescoping well screen. Measuring total well depth. Decomissioning abandoned wells. Confirming well construction (new and old wells). Please call 1-614-846-1900 for details.
|
|  |
| 102-0250 |
Solinst 102 Water Level Meter 250' |
| |
|
Price:
Call
|
|
| The Solinst Model 102 Water Level Meter has been designed for measuring groundwater levels, especially in small diameter tubes and piezometers. The cable has a heavy duty jacket and stainless steel inner conductor for strength. For situations where highly accurate measurements or speed of reading is more important the Model 101 Flat Tape Water Level Meter is also available. The Model 102 Water Level Meter uses a 9V battery and a small diameter probe on narrow coaxial cable. When the probe enters water the electrical circuit is completed, sending a signal back to the reel where a light and clearly audible buzzer are activated. The water level is then determined by taking a reading off the cable at the top of the borehole, casing or tube and by accounting for the distance from the point of measurement to the nearest marking on the cable. Please call 1-614-846-1900 for details.
|
|  |
| 102-0400 |
Solinst 102 Water Level Meter 400' |
| |
|
Price:
Call
|
|
| The Solinst Model 102 Water Level Meter has been designed for measuring groundwater levels, especially in small diameter tubes and piezometers. The cable has a heavy duty jacket and stainless steel inner conductor for strength. For situations where highly accurate measurements or speed of reading is more important the Model 101 Flat Tape Water Level Meter is also available. The Model 102 Water Level Meter uses a 9V battery and a small diameter probe on narrow coaxial cable. When the probe enters water the electrical circuit is completed, sending a signal back to the reel where a light and clearly audible buzzer are activated. The water level is then determined by taking a reading off the cable at the top of the borehole, casing or tube and by accounting for the distance from the point of measurement to the nearest marking on the cable. Please call 1-614-846-1900 for details.
|
|  |
| 101-0650 |
Solinst 101 Water Level Meter 650' |
| |
|
Price:
Call
|
|
| Solinst 101 Water Level Meter tones when the probe comes in contact with water. Tape measured in tenths of inches. Please call 1-614-846-1900 for details.
|
|  |
| 103-1000 |
Solinst 103 Tag Line 1000' |
| |
|
Price:
Call
|
|
| The Solinst Tag Line uses a weight attached to marked cable, and is designed for use in the installation of monitoring wells. It can be used to measure the depth to the bottom of a well, or the depth to the top of a backfill sand or bentonite layer during completion of a well. The Solinst 103 Tag Line uses 1/16” (1.6 mm.) stranded stainless steel wireline with a minimum break strength of 270 lbs. (122 Kg.). The 304 stainless steel weight is 1.5 lbs. (680 g). It has tapered ends to minimize hang-ups during deployment and return to surface and can be clipped on and off the cable. This allows the use of the reel-mounted, marked cable for other uses, such as bailer deployment.
The cable is mounted on a sturdy, free-standing reel with a carrying handle, weight holder and a brake.
Ideal for use when installing Solinst Model 403 CMT Multilevel Systems, the tag line comes in a standard length of 100 ft to 1000 ft (30 m to 300 m), but is also available in longer lengths, on request. Please call 1-614-846-1900 for details.
|
|  |
| 101-750 |
Solinst 101 Water Level Meter 750' |
| |
|
Price:
Call
|
|
| Solinst 101 Water Level Meter tones when the probe comes in contact with water. Tape measured in tenths of inches. Please call 1-614-846-1900 for details.
|
|  |
| 101-1000 |
Solinst 101 Water Level Meter 1000' |
| |
|
Price:
Call
|
|
| Solinst 101 Water Level Meter tones when the probe comes in contact with water. Tape measured in tenths of inches. Please call 1-614-846-1900 for details.
|
|  |
| 101-100 |
Solinst 101 Water Level Meter 100' |
| |
|
Price:
$459.00
|
|
| Ideal for gaining highly accurate measurements of depth to water, the Solinst Model 101 Water Level Meter uses non-stretch tape with heat embossed markings every 1/100ft or millimeter. The dog-bone design of the tape avoids adherence to wet surfaces, providing accurate readings every time. The stranded stainless steel conductors provide strength and protection against corrosion. Please call 1-614-846-1900 for details.
Rental Rates
| Daily | Weekly | Monthly |
| $35.00 | $55.00 | $165.00 |
|
|  |
| 101-250 |
Solinst 101 Water Level Meter 250' |
| |
|
Price:
Call
|
|
| Solinst 101 Water Level Meter tones when the probe comes in contact with water. Tape measured in tenths of inches. Please call 1-614-846-1900 for details.
Rental Rates
| Daily | Weekly | Monthly |
| $40.00 | $80.00 | $245.00 |
|
|  |
| 101-0400 |
Solinst 101 Water Level Meter 400' |
| |
|
Price:
Call
|
|
| Solinst 101 Water Level Meter tones when the probe comes in contact with water. Tape measured in tenths of inches. Please call 1-614-846-1900 for details.
Rental Rates
| Daily | Weekly | Monthly |
| 45.00 | 80.00 | 250.00 |
|
|  |
| 107-100' |
Solinst 107 TLC Meter 100' |
| |
|
Price:
Call
|
|
| The Solinst TLC (Temperature, Level, and Conductivity) displays accurate measurements of conductivity and temperature on an LCD display that rotates for reading convenience. Water level and probe depth measurements are read off the accurate Solinst flat-tape marked each 1/100 ft. or millimeter. The tape is housed on a standard Solinst reel. These features make the TLC Meter ideal for profiling conductivity and temperature in wells and open water. Please call 1-614-846-1900 for details.
|
|  |
| 107-300 |
Solinst 107 TLC Meter 300' |
| |
|
Price:
Call
|
|
| The Solinst TLC (Temperature, Level, and Conductivity) displays accurate measurements of conductivity and temperature on an LCD display that rotates for reading convenience. Water level and probe depth measurements are read off the accurate Solinst flat-tape marked each 1/100 ft. or millimeter. The tape is housed on a standard Solinst reel. These features make the TLC Meter ideal for profiling conductivity and temperature in wells and open water. Please call 1-614-846-1900 for details.
|
|  |
| 107-150 |
Solinst 107 TLC Meter 150' |
| |
|
Price:
Call
|
|
| The Solinst TLC (Temperature, Level, and Conductivity) displays accurate measurements of conductivity and temperature on an LCD display that rotates for reading convenience. Water level and probe depth measurements are read off the accurate Solinst flat-tape marked each 1/100 ft. or millimeter. The tape is housed on a standard Solinst reel. These features make the TLC Meter ideal for profiling conductivity and temperature in wells and open water. Please call 1-614-846-1900 for details.
|
|  |
